School Bus Stop Sign with Electronic Controller - High Visibility Reflective Aluminum Warning Light, Double-Sided Signal Arm for Enhanced Safety

Explore our range of traffic signal lights available in red, yellow, and green. Our School Bus 'STOP' Arm Mechanism is specifically designed to signal when the bus has stopped, ensuring students can exit safely while warning oncoming vehicles for enhanced safety. Product: School Bus Stop Sign Signal / School Bus Parking Sign Application: Designed for installation on the exterior of the vehicle, positioned slightly below window height. Material: Constructed from high-quality aluminum plate with reflective film and red LED. Working Voltage: Compatible with DC 12V or 24V systems. Size: 45 cm / 18 in Control Mode: Electric and manual operation Flip Angle (Electric): 90° ± 2° Protection Grade: IP56 Ambient Temperature Range: -40°C to 80°C Hole Size: 201 mm x 100 mm Wiring Definition: - Red Wire: ACC (positive pole) - Black Wire: GND (negative pole) - White Wire: CTRL (switch) - Yellow Wire: SP optional installation (speed sensor) Wire Harness Length: 300 mm, with an inner diameter of 6 mm PVC hose Base Color Options: White, Black, Yellow, or customized Lighting Mode: Flashing or constant illumination Sound Prompt: Default setting included Theoretical Lifespan: Over 250,000 cycles Mechanical Installation Steps: 1. Confirm the installation position to prevent obstruction of lights or doors. 2. Secure the base: - Drill holes in pre-installed locations on the vehicle body, avoiding key components. - Bolt the base to the vehicle and apply a waterproof sealant. 3. Install the STOP sign: - Attach the reflective STOP sign to the end of the arm, ensuring the text faces outward and is positioned horizontally. Maintenance Instructions: 1. Regularly check for loose support arm screws and re-tighten as necessary. 2. Clean the surface of the STOP signage to maintain the integrity of the reflective coating. 3. Lubricate quarterly by applying lubricant to the spindle and support arm. Note: 1. Color variations may occur due to differences in lighting conditions during photography. 2. A measurement error of 1-3 cm may be present due to manual measurement.

• School Bus Stop Sign: The stop signal on the school bus prominently displays a 'STOP' sign when deployed, signaling to oncoming and following vehicles to halt, ensuring the safety of students as they board or exit the bus.
• High-Visibility Design: This stop arm signal features flame-retardant aluminum alloy housing, is IP65 waterproof, and utilizes 4 alternating flashing LEDs combined with heavy-duty prismatic reflective film, making it visible from up to 500 meters even in low visibility conditions.
• Stable & Durable: Incorporates a magnetic latching mechanism that secures the sign under various traffic conditions, preventing unintentional deployment. The integrated electric/manual operation, powered by a solid copper permanent magnet motor, ensures a lifespan of 100,000 to 250,000 electric cycles and over 10,000 manual cycles.
• Flexible Customization Options: Available in three standard colors—white, black, and yellow—with additional customization options upon request. The lighting mode can easily switch between flashing and steady-on, accommodating different usage scenarios and school bus designs.
• Easy to Install: This school bus signal light can be directly mounted to the side or rear of the bus without major modifications. It is available in both 12V and 24V options, making it compatible with most school bus makes and models.